Need Kia Seltos windshield, door window, quarter glass or rear-glass replacement? Request a local Seltos glass quote with your model year, damaged pane and ZIP code. A local provider verifies the specification and contacts you with pricing.

Seltos glass: use the VIN and actual equipment

Supply the year, trim, VIN and production details when requested. Camera equipment, acoustic construction and auto-defog provisions can change the windshield selection. A trim badge or similar-looking pane is not a substitute for a current application check. A production restriction applies to the specific part described, not automatically every window.

OE windshield references and an estimating-only caution

• 86111-Q5AN0: the 2022–2025 dealer listing describes EX/SX applications with camera, acoustic film and auto-defog. It records 86111-Q5260 as a replaced reference.
• 86111-Q5AX0: a 2024–2025 S/X-Line catalog reference. The dealer’s model catalog explicitly marks it for estimating purposes only and instructs the provider to contact the dealer for the specific part number.

Do not use either entry as an unconditional order instruction. Have the dealer confirm the VIN, current service number and supersessions, camera bracket, mirror and sensor attachments, glass specification and needed trim. The estimating-only note is especially important when comparing quotes.

Auto-defog, acoustic glass and sensor differences

• Acoustic film: a noise-control specification that should be matched where required.
• Auto-defog: not the same as rain sensing or electrically heated windshield glass.
• Rain sensor: identify it separately and ask about the correct mount, interface materials and function checks.
• Interior mirror: identify electrochromic auto-dimming or digital-display equipment where actually fitted; these are separate features.
• Forward camera: the optical area and bracket must match the actual driver-assistance system. A rain sensor or mirror display does not replace that camera.

Calibration after Seltos windshield work

For a camera-equipped Seltos, the installer should consult current Kia repair information for the exact system, complete required camera aiming/calibration and diagnostics after windshield work, and document completion. Ask whether targets, driving conditions or both apply and whether mobile conditions can meet the prerequisites.

No warning lamp alone does not establish correct alignment. Report existing warnings, previous collision work and suspension modifications. A windshield procedure does not automatically mean replacing the camera or calibrating every parking sensor.

Door, fixed side, liftgate and roof glass

• Moving door windows: identify the exact door and side. A complete assessment includes fragment removal inside the door, regulator and guide inspection, correct glass alignment, travel and sealing checks, and any specified initialization. An intact window that will not move may need a mechanism or electrical diagnosis.
• Fixed side or quarter glass: photograph the whole opening and surrounding trim. A fixed pane is not automatically included with the moving door window. Attachment, trim and sealing procedures depend on the actual part.
• Rear liftgate glass: confirm tint, glass construction, defroster and antenna provisions where fitted. The shop should inspect disturbed wiper, camera or trim components, reconnect applicable circuits and verify sealing and affected functions.
• Roof glass, if equipped: identify the actual panel and whether it opens. Broken glass, a binding mechanism and water entry need different diagnoses; tracks, seals and drains may need separate work.

The pane count and replacement method must be verified for your Seltos’s exact body and options. A door-window job does not by itself establish a need for windshield-camera calibration.

OE brand and the company that made each pane

Kia identifies the genuine service-parts brand. The factory glazing company must be verified separately for the individual windshield, door pane, fixed side window or rear glass. Photograph the maker’s etching and DOT marking on the relevant original pane. One supplier name on a windshield does not establish who made all the other windows, and previously replaced glass may have different markings.

Ask the local shop to identify the offered glass brand, part number and equipment specification on the estimate. A supplier logo alone does not establish correct fitment. We do not assign a single factory supplier to every Seltos window without pane-specific documentation.

Get a complete installed quote

Send your Seltos’s year, trim, damaged pane, photos and ZIP code, plus the VIN when requested. Ask for the offered glass brand, service part number, labor, trim, required camera work, taxes and fees in the total. Confirm availability, mobile-service suitability and the full appointment time including adhesive release and calibration. A quote request does not book service.

References: acoustic/auto-defog windshield listing; S/X-Line catalog and estimating-only note. Exact fitment and repair requirements must be confirmed using current vehicle-specific Kia information.