BMW 745Li windshield and door glass replacement

Need a windshield or another window replaced? Emergency Glass Repair collects your vehicle and contact details and connects your request with a local auto glass shop. The shop confirms the glass, provides the quote and arranges service directly with you.

Request a local auto glass quote

745Li: keep the long-wheelbase designation

BMW describes the 745Li as the E66 long-wheelbase version of this 7 Series generation, extended by 140 mm compared with the E65. This distinction is particularly useful when identifying rear-door glass. Provide the year and VIN and identify the exact pane; do not assume a 745i listing fits.

Tell the shop whether you need moving door glass, a separate fixed pane, a windshield or rear glass. If a window sticks or drops without breaking, request diagnosis of the mechanism. For windshield work, ask the installer to verify the actual sensor and glazing specification before ordering.

BMW E65/E66 model history

How the shop plans the replacement

1. Identify the glass. Confirm the chassis, body, damaged location and existing markings.
2. Check materials and availability. Establish the correct mounting method, seals, trim and any required hardware before removal.
3. Remove, inspect and install. Follow the model-specific procedure and inspect the mounting area for deterioration or previous damage.
4. Check and release. Review sealing, trim fit and affected functions. Follow any adhesive release time and aftercare instructions that apply to the repair.

Door glass and window regulator repairs

Choose the left or right side as viewed from the driver’s seat facing forward. Tell the shop whether the glass is shattered, stuck, tilted, dropping into the door or moving normally with a crack. A regulator or guide fault needs diagnosis; new glass alone may not solve it.

Ask the installer to inspect the guides, seals, glass mounting and regulator, remove broken fragments and check alignment and smooth travel. Where fitted, automatic window operation and anti-pinch protection should be checked using the applicable BMW service procedure. Do not test protection with your hand or another body part.

Does the window need initialization?

After glass, regulator or motor work, ask whether window initialization is required for your exact model year and affected window. A verified switch sequence is not supplied here: the installer should use the matching BMW repair instructions and address binding or electrical faults before initialization. Do not bypass anti-pinch protection to make a window close.

Equipment, glass manufacturer and final checks

Ask which glass brand and specification the shop proposes and whether it matches the required application. The factory supplier should not be assumed from the BMW badge alone. A windshield rain sensor, if present, is different from a driver-assistance camera; the installer should verify the equipment and applicable service instructions before adding any calibration work.

For rear glass, discuss electrical connections and any defroster check. Roof glass damage, a sticking roof and a water leak require different inspections; describe the symptom and panel rather than requesting a windshield by default. Confirm trim fit, sealing checks, written warranty terms and any release time before collecting the car.

Get an installed quote and schedule with the shop

Select the year, make, model, body style and damaged glass, then enter your name, phone number and ZIP code. Have your VIN ready and provide it when prompted after submitting. The shop may still need equipment answers or photos to identify the glass.

Ask for the installed total, including required parts, moldings, taxes and other charges. Confirm availability, mobile-service options, appointment length and release time directly with the shop. Submitting a request does not book service. Supplier costs and glass-only prices are not shown in this guide.